3.7KW | 5.0KW

SolaX Single Phase X1 Retro Fit Charger - High Voltage

SolaX Power is delighted to announce the release of our new X1 Retro Fit Charger. Generate energy from your solar panels during the day, once the background load is satisfied, the intelligent SolaX X1 Retro Fit will direct excess energy into your battery for later use. Enabling you to make the most use of your generated energy. If your home experiences a loss of power, the X1 Retro Fit will then send the stored power back to the home, ensuring you are never left in the dark even during a power-cut. Compatible with every inverter manufacturer, the X1 Retro Fit charger is the perfect upgrade to your system.

  • Add To Existing PV
  • Charge From Grid
  • Online Monitoring
  • Max Efficiency Up To 97%
  • Emergency Power Supply
  • 'Plug & Play' Installation

Generate solar power during the day for use in the home, when the background load is satisfied, charge your
batteries with free, clean solar energy. Discharge your stored energy during the evening when the sun has gone down, charge your batteries back
up over night on a cheaper tariff.

Upgrade To Solar Storage Without Losing Your FiT

Add To Existing PV Systems

The SolaX X1 Retro-Fit Charger can be fitted alongside any string inverter on the market today, enabling you to upgrade to solar battery storage without changing your current installation. You also get the added benefit of emergency power supply, keeping you powered during a power cut. 

Emergency Power Supply

Never Lose Power

With the  SolaX X1 Retro-Fit  you can ensure that you never go without power, even during a power-cut. An emergency power supply or ‘EPS’ switch (only available on ‘E’ models) enables the X1 Retro-Fit to work completely off-grid, meaning that any power you have stored on your batteries will now be used in the event of a power cut.

IP65 Rated Protection

Install Indoors Or Outdoors

The X1 Retro-Fit is IP65 rated meaning that it can be installed either inside or outside, giving you the flexibility to choose where to install the system.

Electronic Downloads

X1 Retro-Fit Product Downloads

View The Technical Specifications

Nominal AC power [VA]368046004999
Max apparent power [VA]368046004999
Nominal grid voltage(AC voltage range) [V]220/230/240 (180-270)
Nominal grid frequency/range [Hz]50/60
Nominal AC current [A]162021.7
Displacement power factor0.8 leading.. 0.8 lagging
THDi, rated power [%]<2
Max. apparent AC power [VA]368046004999
Max. AC current [A]162121.7
Nominal grid voltage (AC voltage range) [V]220/230/240 (180-270)
Nominal grid frequency/range[Hz]50/60
Battery voltage range [V]85-400
Recommended battery voltage range [V]300
Max continuous charge/discharge current [A] 20
Communication interfacesCAN/RS485
Reverse connect protectionYes
EPS max continuous apparent power [VA]500060006000
EPS rated voltage[V], Frequency [Hz]230, 50/60
EPS max continuous current [A]21.72626
EPS peak apparent power [VA]600080008000
Changeover time [ms]<500
THDv, linear load<2
Changeover deviceYes
Max battery charge efficiency (GRID to BAT)95.60
Max battery charge efficiency (BAT to AC)97.00
Max efficiency97.00
Standby consumption (Night) [W]< 3
Safety & protection
Over/under voltage protectionYES
Monitoring ground fault protectionYES
Grid protectionYES
EMCEN 61000-6-1 / EN 61000-6-2 / EN 61000-6-3
Environment Limit
Degree of protection(according to IEC60529)
Operating temperature [°C]430*341.5*143
max operation altitude [m]15.5
Humidity [%]Natural
Storage temperature [°C]Non-isolated
Typical noise emission [dB]Yes
Dimensions(WxHxD) [mm]476*464*180
Weight [kg]23
Cooling conceptNatural
LCD displayBacklight 20*4 character
Standard warranty [year]5-10
Have questions? Search our knowledgebase.